Ekin – 30 Orion
Machine Specs
Clamping Force:
30T
Injection Weight (PS):
54 gr (PS)
Space Between Tie Bars:
270 x 270
Screw Diameter:
25
The ORION series where many innovations were made and the most up-to-date design were obtained in the vise unit. The piston clamping clamp structure developed in 30 to 400 Ton models has been tightened centrally and there is no need for lubrication system. In addition to high strength structure, wide column intervals and euromap standarts are made available with their latest versions. Besides, coupled with fast opening- closing via proportional controlled direction valve used, stop in the the same point continuously is ensured while mould and clamp are opened. For mould fixing Euromap standart size holes and T slots available on platens.
| INJECTION UNIT | ||||
| MACHINE MODEL | Birim | A | B | C |
| Screw Diamater | mm | 20 | 25 | 30 |
| Screw L/D Ratio | L/D | 25 | 20 | 16,7 |
| Shot Size | cm³ | 38 | 59 | 85 |
| Injection Weight (PS) | g | 35 | 54 | 78 |
| Injection Rate | g/s | 39 | 48 | 67 |
| Plasticizing Capacity | g/s | 4 | 6 | 9 |
| InjectionPressure | MPa | 240 | 180 | 145 |
| Screw Speed | rpm | 0-280 | ||
| Screw Storke | mm | 120 | ||
| CLAMPING UNIT | ||||
| MACHINE MODEL | Birim | A,B,C | ||
| Clamping Force | KN | 300 | ||
| Toggle Stroke | mm | 400 | ||
| Space Between Tie Bars | mm | 270 x 270 | ||
| Max. Daylight | mm | 500 (550) | ||
| Min. MouldHight | mm | 100 (150) | ||
| Ejector Stroke | mm | 60 | ||
| Ejector Force | KN | 15 | ||
| EjectorNumber | PC | 1 | ||
| GENERAL DETAILS | ||||
| MACHINE MODEL | Birim | A,B,C | ||
| Max. PumpPressure | Mpa | 16 | ||
| Pump Motor Power | Kw | 10 | ||
| Heater Power | Kw | 3,5 | ||
| Machine Dimensions (LxWxH) | m | 1,1 x 3,5 x 1,85 | ||
| Machine Weight | T | 2 | ||
| Oil Tank Capacity | l | 170 | ||
| Fixed Plate Flange Dimen | mm | 100 |
