Ekin - 55V-2R
Double Station Rotary Table Vertical Injection MachineMachine Specifications
Clamping Force:
550 kN
Injection Weight (PS):
90 gr (PS)
Screw Diameter (mm):
30
It is the most preferred vertical injection model and in addition to the fact that it provides lot of advantages of other series, it creates difference with two station turntable causing the molds come to the front of operators. Because the plate movement provided by servo motor, in terms of high-speed, position control and precision this machine is different from others. Comfortable part placing in molds with inserts, facilitated mold design, small space needed, increased number of production with two stations, the highest level of safety, operator’s work in comfort provide the machine with coming to the fore.
INJECTION UNIT | ||||
MACHINE MODEL | Birim | A | B | C |
Screw Diameter | mm | 25 | 30 | 35 |
Screw L/D Ratio | L/D | 23,6 | 20 | 18 |
Shot Size | cm³ | 68 | 99 | 134 |
Injectıon Weight (ps) | g | 63 | 91 | 123 |
Injectıon Rate | g/s | 49 | 62 | 74 |
Plasticizing Capacity | g/s | 7 | 10 | 15 |
Injectıon Pressure | MPa | 230 | 180 | 140 |
Screw Speed | rpm | 0-220 | ||
Screw Stroke | mm | 140 | ||
CLAMPING UNIT | ||||
MACHINE MODEL | Birim | Değer | ||
Clamping Force | KN | 550 | ||
Clamping Stroke | mm | 200 | ||
Min. Mold High | mm | 150 (250) | ||
Maxımum Openıng | mm | 350 (450) | ||
Max Mold Dimensions | mm | 450 x 250 | ||
Ejector Stroke | mm | 70 | ||
Ejector Force | KN | 43 | ||
HYDRAULIC ELECTRIC SYSTEM | ||||
MACHINE MODEL | Birim | Değer | ||
Max. Pump Pressure | Mpa | 14 | ||
Pump Motor Power | Kw | 11 | ||
Heater Power | Kw | 4,2 | ||
Oil Tank Capacity | l | 350 | ||
GENERAL DETAILS | ||||
MACHINE MODEL | Birim | Değer | ||
Slide Table Stroke | mm | - | ||
Rotary Table Diameter | mm | 798 | ||
Machine Dimensions (LxWxH) | m | 2,1 x 1,0 x 3,1 | ||
Machine Weight | t | 3,5 |